Fixes: - Enabled firmware burning (using mstflint) when the driver is down - Fixed health buffer false alarm "irisc stuck" indication when using DC transport - Fixed rare unexpected completion with error on DC QPs - On rare occasions, after PXE boot, the...
Fixes: - Enabled firmware burning (using mstflint) when the driver is down - Fixed health buffer false alarm "irisc stuck" indication when using DC transport - Fixed rare unexpected completion with error on DC QPs - On rare occasions, after PXE boot, the...
New Features:- Added support for EDR cables (up to FDR speeds).- Added additional InfiniBand spec optional counters- Improved resource allocation for absolute-priority VL's (when VL-high-limit is set to 255 in SM) to reduce latency of high priority...
Fixes: - The first Read response was not treated as implicit ACK - Reduced a long 40GbE link up time with Cisco Nexus 3064 and Arista-7050S...
Fixes: - The first Read response was not treated as implicit ACK - Reduced a long 40GbE link up time with Cisco Nexus 3064 and Arista-7050S...
Changes: - Lowered the externally managed switches default fan speed from 80% to 60% - Added congestion control attribute “PORT_VL_XMIT_TIME_CONG” according to 3.23 CounterGroupInfo in Vendor Specific MADs version 1.1 - Added support for...
Changes: - Lowered the externally managed switches default fan speed from 80% to 60% - Added congestion control attribute “PORT_VL_XMIT_TIME_CONG” according to 3.23 CounterGroupInfo in Vendor Specific MADs version 1.1 - Added support for...
Changes: - Support multiple RoCE modes (RoCE v1+v2) on the same port: RoCE mode is per connection now. - Added a new QP command “INIT2RTS_QP” to enhance QP connection readiness time. - Disabled FCS checks to support switches that replace FCS...
Ændringer: - Rettet en over-abonnement på RX buffer, når Flow Control ikke blev aktiveret som forårsagede RX rør til at hænge. - Rettet et problem forårsager firmware til at hænge, når du kører ibdiagnet. Den modtagne DiagData MAD omfattede følgende...
Denne pakke indeholder de nødvendige filer til installation af Mellanox MCX416A-BCAT Card Firmware. Hvis det er blevet installeret, kan opdatere (overskrive-installation) løse problemer, tilføje nye funktioner, eller udvide de eksisterende. Selvom andre...
