Mellanox MCX313A-BCBT rev.A3 Network Card Firmware 2.35.5100 Opdateret
Fixes: - The first Read response was not treated as implicit ACK - Reduced a long 40GbE link up time with Cisco Nexus 3064 and Arista-7050S...
Fixes: - The first Read response was not treated as implicit ACK - Reduced a long 40GbE link up time with Cisco Nexus 3064 and Arista-7050S...
Fixes: - The first Read response was not treated as implicit ACK - Reduced a long 40GbE link up time with Cisco Nexus 3064 and Arista-7050S...
Fixes: - The first Read response was not treated as implicit ACK - Reduced a long 40GbE link up time with Cisco Nexus 3064 and Arista-7050S...
Changes: - Support multiple RoCE modes (RoCE v1+v2) on the same port: RoCE mode is per connection now. - Added a new QP command “INIT2RTS_QP” to enhance QP connection readiness time. - Disabled FCS checks to support switches that replace FCS...
Changes: - Lowered the externally managed switches default fan speed from 80% to 60% - Added congestion control attribute “PORT_VL_XMIT_TIME_CONG” according to 3.23 CounterGroupInfo in Vendor Specific MADs version 1.1 - Added support for...
Changes: - Lowered the externally managed switches default fan speed from 80% to 60% - Added congestion control attribute “PORT_VL_XMIT_TIME_CONG” according to 3.23 CounterGroupInfo in Vendor Specific MADs version 1.1 - Added support for...
Changes: - Lowered the externally managed switches default fan speed from 80% to 60% - Added congestion control attribute “PORT_VL_XMIT_TIME_CONG” according to 3.23 CounterGroupInfo in Vendor Specific MADs version 1.1 - Added support for...
Changes: - Lowered the externally managed switches default fan speed from 80% to 60% - Added congestion control attribute “PORT_VL_XMIT_TIME_CONG” according to 3.23 CounterGroupInfo in Vendor Specific MADs version 1.1 - Added support for...
Changes: - Lowered the externally managed switches default fan speed from 80% to 60% - Added congestion control attribute “PORT_VL_XMIT_TIME_CONG” according to 3.23 CounterGroupInfo in Vendor Specific MADs version 1.1 - Added support for...
Fixes: - Enabled firmware burning (using mstflint) when the driver is down - Fixed health buffer false alarm "irisc stuck" indication when using DC transport - Fixed rare unexpected completion with error on DC QPs - On rare occasions, after PXE boot, the...